Customization: | Available |
---|---|
After-sales Service: | Installation Guide Support |
Warranty: | 1 Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Engine Speed | Type of Operation | Engine | Genset | |
r/min | kW | kW | kVA | |
1500 | Prime Power | 882 | 800 | 1000 |
Standby Power | 970 | 880 | 1100 |
SPECIFICATIONS | FUEL CONSUMPTION | ||
Engine Model | 6WTAA25-G31 | Power | lit/hr |
Engine Type | In-line,4 strokes, water-cooled | 25% | 64 |
4 valves, Turbo charged | 50% | 111 | |
air-to-air intercooled | 75% | 161 | |
Combustion type | Direct injection | 100% | 220.8 |
Cylinder Type | Dry liner | 110% | 245.8 |
Number of cylinders | 6 | ||
Bore × stroke | 186 × 215mm | ||
Displacement | 35.1 L | FUEL SYSTEM | |
Compression ratio | 15 : 1 | Injection pump | Hengyang |
Firing order | 1-5-3-6-2-4 | Governor | Electric type |
Injection timing | Electric type | Feed pump | Mechanical type |
Dry weight | 4000kg | Injection nozzle | Multi hole type |
Dimension(L×W×H) | 2429×1387×2146 mm | Opening pressure | 290kg/cm2 |
Rotation | CCW viewed from flywheel | Fuel filter | Full flow, cartridge type |
Fly wheel housing | SAE NO.0 | Used fuel | Diesel fuel oil |
Fly wheel | SAE NO.18 | ||
MECHANISM | LUBRICATION SYSTEM | ||
Type | Over head valve | Lub. Method | Fully forced pressure feed type |
Number of valve | Intake 2, exhaust 2 per cylinder | Oil pump | Gear type driven by crankshaft |
Valve lashes at cold | Intake 0.4mm | Oil filter | Full flow, cartridge type |
Exhaust 0.45mm | Oil pan capacity | High/ Low level 100L/75L | |
VALVE TIMING | Angularity limit | Front down 25° | |
Opening Close | Front up35° | ||
Intake valve | 40°BTDC 48°ABDC | Side to side 35° | |
Exhaust valve | 54°BBDC 30°ATDC | Lub. Oil | Refer to Operation Manual |
COOLING SYSTEM | ENGINEERING DATA | ||
Cooling method | Fresh water forced circulation | Heat rejection to coolant | 129kcal/sec /1,500 rpm |
Water capacity | 78 L(engine only) | Heat rejection to CAC | 50kcal/sec /1,500 rpm |
Engine waste heat | 2×32.5m3/min /1,500 rpm | ||
Water pump | Centrifugal type driven by belt | Exhaust gas flow | 162.6m3/min /1,500 rpm |
Water pump Capacity | 1000L/min at 1500r/min | Exhaust gas temp. | 650 °C |
Thermostat | Wax-pellet type | Max. permissible restrictions | |
Opening temp. 77°C | Intake system | 3 kPa initial / 6 kPa final | |
Full open temp. 90°C | Exhaust system | 11 kPa max. | |
Cooling fan | Blower type, plastic | Intercooler resistance limit | 14 kPa |
1371 mm diameter, 8 blades | |||
Max. coolant temperature at standby / prime power | ELECTRICAL SYSTEM | ||
102/98ºC | Charging generator | 27V×55A | |
Voltage regulator | Built-in type IC regulator | ||
Starting motor | 24V×13kW | ||
Battery Voltage | 24V | ||
Battery Capacity | 200 A |
Making a perfect proposal for your production line;
Designing the suitable machines based on your requirements;
Manufacture machines you need;
Inspecting, packing, uploading and shipping service;
Offering all related auxiliary machines, spare parts and consumable tools;
Installing and adjusting machines on site and technology training your labors for operation;
Trial production on site till everything is going well;
On-site technology support if customer needs.
24 hours service online before sales and after sales.