| Customization: | Available |
|---|---|
| Application: | Aviation, Electronics, Industrial, Hardware, Household Appliances, Car, Metal Manufacturing |
| Standard: | GB, DIN, ASTM |
|
Still deciding? Get samples of US$ 35/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction of non-standard shaped carbide products
1. The raw tungsten carbide powder with high purity content of 99.95% is adopted.
2. Spray drying technology is adopted, and the materials are protected by high purity nitrogen under the condition of full sealing, which effectively reduces the possibility of increasing oxygen in the preparation process of the mixture. The purity is better, and the materials are not easy to be dirty.
3. Adopt low pressure sintering technology, good compactness, high wear resistance and impact resistance.
4. Hard alloy non-standard special-shaped products: non-standard blade, non-standard die, non-standard plate, non-standard wear-resistant parts, etc.
5. Size and specification: according to customer samples or drawings production.
6. Brand: YG6 and YG8, YG11, YG15, YG20, YG6X, YG10X, YG8C, YL10.2, etc.
| Grade | Density g/cm3 |
Hardness Har> |
Bending strength n/mm3(Mpa) | Application |
| YG8 | 14.8 | 89.5 | >3500 | It is suitable for rough machining of cast iron, non-ferrous metal and non-metallic materials, stretching of steel and non-ferrous metal and pipe, geological drill, machine manufacturing tools and easy to wear parts. |
| YG11 | 14.4 | 88.5 | >3650 | Suitable for all kinds of metal and non-metal powder molding and stamping. |
| YG15 | 14.0 | 87.5 | >3800 | It is suitable for drawing steel bar and steel pipe under high compression rate, top satin, punching and stamping tools working under greater stress, and die core of automatic powder gold pressing machine. |
| YG20 | 13.5 | 85.5 | >4200 | With high strength, suitable for the production of progressive die stamping die: such as stamping watch parts, battery case, small nuts, etc. |
| YG16C | 13.9 | 85.5 | >3500 | High wear resistance, red die, reduced diameter die, small deformation die. |
| YG20C | 13.5 | 83.5 | >3800 | Strong versatility, straight rod die, screw die on the die, the production of standard parts, bearings, tools and other industries with cold heading, cold stamping, cold pressing die. |
| YG22C | 13.3 | 83.0 | >4000 | Suitable for heavy load countersunk die, nut die. |
| YG25C | 13.1 | 82.5 | >4250 | Suitable for lower die of nut, can bear large load and stainless steel screw stamping. |
Making graphite mold based on your drawing or your finished products' size
Inspecting, packing, uploading and shipping service;
Offering all related auxiliary machines, spare parts and consumable tools;
Installing and adjusting machines on site and technology training your labors for operation;
Trial production on site till everything is going well;
On-site technology support if customer needs.
24 hours service online before sales and after sales.
){kind=link}