| Customization: | Available |
|---|---|
| After-sales Service: | Installation Guide Support |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Engine Speed | Type of Operation | Engine | Genset | |
| r/min | kW | kW | kVA | |
| 1500 | Prime Power | 818 | 720 | 900 |
| Standby Power | 900 | 800 | 1000 | |
| SPECIFICATIONS | FUEL CONSUMPTION | ||
| Engine Model | 6WTAA25-G31 | Power | lit/hr |
| Engine Type | In-line,4 strokes, water-cooled | 25% | 64 |
| 4 valves, Turbo charged | 50% | 111 | |
| air-to-air intercooled | 75% | 161 | |
| Combustion type | Direct injection | 100% | 220.8 |
| Cylinder Type | Dry liner | 110% | 245.8 |
| Number of cylinders | 6 | ||
| Bore × stroke | 186 × 215mm | ||
| Displacement | 35.1 L | FUEL SYSTEM | |
| Compression ratio | 15 : 1 | Injection pump | Hengyang |
| Firing order | 1-5-3-6-2-4 | Governor | Electric type |
| Injection timing | Electric type | Feed pump | Mechanical type |
| Dry weight | 4000kg | Injection nozzle | Multi hole type |
| Dimension(L×W×H) | 2429×1387×2146 mm | Opening pressure | 290kg/cm2 |
| Rotation | CCW viewed from flywheel | Fuel filter | Full flow, cartridge type |
| Fly wheel housing | SAE NO.0 | Used fuel | Diesel fuel oil |
| Fly wheel | SAE NO.18 | ||
| MECHANISM | LUBRICATION SYSTEM | ||
| Type | Over head valve | Lub. Method | Fully forced pressure feed type |
| Number of valve | Intake 2, exhaust 2 per cylinder | Oil pump | Gear type driven by crankshaft |
| Valve lashes at cold | Intake 0.4mm | Oil filter | Full flow, cartridge type |
| Exhaust 0.45mm | Oil pan capacity | High/ Low level 100L/75L | |
| VALVE TIMING | Angularity limit | Front down 25° | |
| Opening Close | Front up35° | ||
| Intake valve | 40°BTDC 48°ABDC | Side to side 35° | |
| Exhaust valve | 54°BBDC 30°ATDC | Lub. Oil | Refer to Operation Manual |
| COOLING SYSTEM | ENGINEERING DATA | ||
| Cooling method | Fresh water forced circulation | Heat rejection to coolant | 129kcal/sec /1,500 rpm |
| Water capacity | 78 L(engine only) | Heat rejection to CAC | 50kcal/sec /1,500 rpm |
| Engine waste heat | 2×32.5m3/min /1,500 rpm | ||
| Water pump | Centrifugal type driven by belt | Exhaust gas flow | 162.6m3/min /1,500 rpm |
| Water pump Capacity | 1000L/min at 1500r/min | Exhaust gas temp. | 650 °C |
| Thermostat | Wax-pellet type | Max. permissible restrictions | |
| Opening temp. 77°C | Intake system | 3 kPa initial / 6 kPa final | |
| Full open temp. 90°C | Exhaust system | 11 kPa max. | |
| Cooling fan | Blower type, plastic | Intercooler resistance limit | 14 kPa |
| 1371 mm diameter, 8 blades | |||
| Max. coolant temperature at standby / prime power | ELECTRICAL SYSTEM | ||
| 102/98ºC | Charging generator | 27V×55A | |
| Voltage regulator | Built-in type IC regulator | ||
| Starting motor | 24V×13kW | ||
| Battery Voltage | 24V | ||
| Battery Capacity | 200 AH | ||
Making a perfect proposal for your production line;
Designing the suitable machines based on your requirements;
Manufacture machines you need;
Inspecting, packing, uploading and shipping service;
Offering all related auxiliary machines, spare parts and consumable tools;
Installing and adjusting machines on site and technology training your labors for operation;
Trial production on site till everything is going well;
On-site technology support if customer needs.
24 hours service online before sales and after sales.
){kind=link}