6wtaa25-G32 Sdec Power Diesel Generator Unit

• After-sales Service: Installation Guide Support
• Warranty: 1 Year
• Type: Micro-Computer Control Automatic Diesel Generator
• Installation Method: Fixed
• Stroke: Four Stroke
• Cooling Method: Water Cooling
• Model NO.: 6WTAA25-G32
• Output Type: AC Three Phase
• Speed: Speed
• Conditions of Use: Land Use
• Usage: Common Units, Standby Unit, Emergency Crew
• Landuse Type of Unit: Low Noise Automation Type
• Excitation Mode: Pmg
• Engine Speed: 1500 R/Min
• Engine(Prime Power): 818kw
• Engine(Standby Power): 900kw
• Generator Set (Prime Power): 720kw / 900kVA
• Generator Set (Standby Power): 800kw / 1000kVA
• Transport Package: Wooden Plate
• Specification: 3300*1500*1700
• Trademark: DTINDUSTRY
• Origin: China
• HS Code: 85021310
• Production Capacity: 20sets/Year

Product Description

Product Description

 

6WTAA25-G32 SDEC Power diesel generator unit

-. The engine performance is as per GB/T2820.
-. Ratings are based on GB/T1147.1.
---Prime power is available for an unlimited number of hours per year in a variable load application. The permissible average power output over 24 hours of operation shall not exceed 80% of the prime power rating.
---Standby power is available in the event of a utility power outage or under test conditions for up to 200 hours of operation per year. The permissible average power output over 24 hours of operation shall not exceed 80% of the standby power rating.







 

Engine Speed	Type of Operation	Engine	Genset
r/min		kW	kW	kVA
1500	Prime Power	818	720	900
	Standby Power	900	800	1000

------WELCOME TO CUSTOMIZE------

Product Parameters

SPECIFICATIONS		FUEL CONSUMPTION
Engine Model	6WTAA25-G31	Power	lit/hr
Engine Type	In-line,4 strokes, water-cooled	25%	64
	4 valves, Turbo charged	50%	111
	air-to-air intercooled	75%	161
Combustion type	Direct injection	100%	220.8
Cylinder Type	Dry liner	110%	245.8
Number of cylinders	6
Bore × stroke	186 × 215mm
Displacement	35.1 L	FUEL SYSTEM
Compression ratio	15 : 1	Injection pump	Hengyang
Firing order	1-5-3-6-2-4	Governor	Electric type
Injection timing	Electric type	Feed pump	Mechanical type
Dry weight	4000kg	Injection nozzle	Multi hole type
Dimension(L×W×H)	2429×1387×2146 mm	Opening pressure	290kg/cm2
Rotation	CCW viewed from flywheel	Fuel filter	Full flow, cartridge type
Fly wheel housing	SAE NO.0	Used fuel	Diesel fuel oil
Fly wheel	SAE NO.18
MECHANISM		LUBRICATION SYSTEM
Type	Over head valve	Lub. Method	Fully forced pressure feed type
Number of valve	Intake 2, exhaust 2 per cylinder	Oil pump	Gear type driven by crankshaft
Valve lashes at cold	Intake  0.4mm	Oil filter	Full flow, cartridge type
	Exhaust 0.45mm	Oil pan capacity	High/ Low level 100L/75L
VALVE TIMING		Angularity limit	Front down 25°
	Opening         Close		Front up35°
Intake valve	40°BTDC     48°ABDC		Side to side 35°
Exhaust valve	54°BBDC     30°ATDC	Lub. Oil	Refer to Operation Manual
COOLING SYSTEM		ENGINEERING DATA
Cooling method	Fresh water forced circulation	Heat rejection to coolant	129kcal/sec /1,500 rpm
Water capacity	78 L(engine only)	Heat rejection to CAC	50kcal/sec /1,500 rpm
		Engine waste heat	2×32.5m3/min /1,500 rpm
Water pump	Centrifugal type driven by belt	Exhaust gas flow	162.6m3/min /1,500 rpm
Water pump Capacity	1000L/min at 1500r/min	Exhaust gas temp.	650 °C
Thermostat	Wax-pellet type	Max. permissible restrictions
	Opening temp. 77°C	Intake system	3 kPa initial / 6 kPa final
	Full open temp. 90°C	Exhaust system	11 kPa max.
Cooling fan	Blower type, plastic	Intercooler resistance limit	14 kPa
	1371 mm diameter, 8 blades
Max. coolant temperature at standby / prime power		ELECTRICAL SYSTEM
102/98ºC		Charging generator	27V×55A
		Voltage regulator	Built-in type IC regulator
		Starting motor	24V×13kW
		Battery Voltage	24V
		Battery Capacity	200 AH

Related products

 

 

 

Main features

 

 

Our Advantages

Making a perfect proposal for your production line;
Designing the suitable machines based on your requirements;
Manufacture machines you need;
Inspecting, packing, uploading and shipping service;
Offering all related auxiliary machines, spare parts and consumable tools;
Installing and adjusting machines on site and technology training your labors for operation;
Trial production on site till everything is going well;
On-site technology support if customer needs.
24 hours service online before sales and after sales.

Company Profile

Guangzhou DT Export and Import Co., Ltd was established in Guangzhou in 2012, we are an industrial and trading company special for Furnace and related machineries for Level continuous casting production line, Upwards continuous casting production line, they are casting machineries, cutting machineries, peeling machineries, straightening machineries, and combined drawing machineries and all other related metallic processing machineries. Our foundry is about more than 5000 square meters, and more than 100 employees who are in search and development team, overseas sales and service team, technology support team. Our factory passed ISO 9001: 2008. And Presented Audited supplier by SGS-CSTC since 2013.
Our advantages: Qualified Machines; Professional technology, Efficient Service, Worry-free Guarantee.
Our Values: Products as the fundamental, Customers as the center, Create a win-win situation.

You may like