| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Type: | Tungsten carbide nib, Tungsten Carbide Nib |
|
Still deciding? Get samples of US$ 35/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product introduction
1. Tungsten carbide die usually refers to a variety of wire drawing die.
2. The center of all drawing die holes has a certain shape, such as circle, square, octagon or other special shapes.
3. Pull the metal out of the smaller mold holes.
4. Drawing die can be drawn for different materials, such as low carbon steel, high carbon steel, stainless steel, brass, aluminum and so on.
| Grade No. | Density g/cm3 |
T.R.S HP |
Hardness HRA |
Performance & Applicaion |
| YG8 | 14.7 | 2400 | 89.5 | With higher strength, lower than YG6, suitable for making parts. |
| Grade No. | Density g/cm3 |
T.R.S HP |
Hardness HRA |
Performance & Applicaion |
| YG6 | 14.9 | 2150 | 90 | High performance, it is used for cast iron, non-ferrous metal and its alloy and non-metallic materials processing tools, parts, but also can be used for other tools with alloy. |
| YG8 | 14.7 | 2400 | 89.5 | With higher strength, lower than YG6, suitable for making parts. |
| YG11 | 14.4 | 2420 | 88.5 | Suitable for all kinds of metal and non-metal powder molding and stamping. |
| YG15 | 14 | 2500 | 87.5 | Suitable for drawing steel bar and steel pipe under high compression rate. Top forging, punching and stamping tools that work under high stresses |
| YG20 | 13.5 | 2800 | 85.5 | Suitable for making stamping die. Such as stamping watch parts, musical instrument spring, etc.; Die for punching battery case and tooth paste; Stamping die for small size steel balls, screws, nuts, etc. |
| YG16C | 13.9 | 2750 | 85.5 | Suitable for general impact resistance forging die. |
| YG18C | 13.7 | 2800 | 84.5 | Suitable for general impact - resistant forging die, hot heading die and finishing roll. |
| YG20C | 13.5 | 2850 | 83.5 | Suitable for general damage, impact resistance mold. |
| YG22C | 13.3 | 2900 | 83 | Suitable for general impact resistant die and nut forming die. |
| YG25C | 13.1 | 2950 | 82.5 | Suitable for stainless steel screw die, semi - finished roll. |
1. Used for manufacturing high temperature parts, wearing parts, anti-shielding parts and corrosion resistant parts.
2. Used for manufacturing hardware and standard stamping dies.
3. Suitable for electronic industry, motor rotor, stator, LED lead frame, EI silicon wafer, etc.
4. Used for the production of drawing dies, wear parts, stamping parts and automatic presses with punches.
5. Used for stamping die, extrusion die, stamping die.
6. Stretch a variety of steel wire, aluminum wire, high carbon, MS wire, etc.
Making tungsten steel mold based on your drawing or your finished products' size.
Inspecting, packing, uploading and shipping service;
Offering all related auxiliary machines, spare parts and consumable tools;
Installing and adjusting machines on site and technology training your labors for operation;
Trial production on site till everything is going well;
On-site technology support if customer needs.
24 hours service online before sales and after sales.
){kind=link}