Copper/Brass melting furnace is a complete set of vacuum exercise equipment, using the principle of medium frequency induction heating to melt metal under vacuum conditions. Suitable for nickel base alloy, special steel, fine alloy, superalloy, non-ferrous metal and its alloy in vacuum or maintenance atmosphere melting and casting. It can also be used for melting and casting of rare earth metals and hydrogen storage materials.
Primary structure and composition: copper melting furnace according to the structure can be divided into vertical and horizontal two series. According to the discharge method, the vertical series is divided into three ways: upper discharge, lower discharge and side discharge; Horizontal series is divided into bottom discharge and upper discharge.
Copper melting furnace is mainly composed of electric furnace body, vacuum system, power intake equipment, water cooling system, hydraulic system, pneumatic system, electrical control system, medium frequency power supply.
CUSTOMIZED INDUSTRIAL INDUCTION ELECTRIC MELTING FURNACE AND HOLDING FURNACE
Low frequency Cored induction industrial melting furnace is the best equipment for horizontal continuous brass melting and casting.
The Copper/brass rod/bar horizontal Continuous Casting Machine is a melting and holding furnace with a cooler, together with graphite die and cooler assembly and run out track with withdrawal machine and cut-off device. Molten copper flows from the crucible into the graphite casting die which is cooled with the help of a highly efficient cooling jacket. Water-cooled graphite dies are attached horizontally to the holding crucible. During the continuous casting operation copper flows into the graphite casting die here it solidifies. The solidified strands are intermittently withdrawn by the withdrawal equipment.
------Welcome to customize------
| Model Number |
GYT-150 |
GYT-300 |
GYT-500 |
GYT-700 |
GYT-1000 |
GYT-1500 |
| Capacity(T) |
1 |
2.5 |
4 |
5.5 |
7.5 |
15 |
| Power Consumption(kw) |
50 |
80 |
120 |
180 |
240 |
360 |
| Melting Rate(KG/Hour) |
Copper |
120 |
300 |
500 |
750 |
1000 |
1500 |
| Brass |
150 |
400 |
650 |
900 |
1200 |
1800 |
| Voltage(V) |
380 |
380 |
380 |
380 |
380 |
380 |
| Phase |
3(ABC) |
3(ABC) |
3(ABC) |
3(ABC) |
3(ABC) |
3(ABC) |
| Currency/Phase(An) |
106 |
140 |
240 |
300 |
400 |
600 |
| Power Factor |
0.95 |
0.95 |
0.95 |
0.95 |
0.95 |
0.95 |
| Frequency(HZ) |
50 |
50 |
50 |
50 |
50 |
50 |
| Working Temperature(ºC) |
Copper |
1350 |
1350 |
1350 |
1350 |
1350 |
1350 |
| Brass |
1080 |
1080 |
1080 |
1080 |
1080 |
1080 |
| Cooling System |
Water /air
Cooling |
Water/air
cooling |
Water /air
Cooling |
Water Cooling |
Water Cooling |
Water Cooling |
1. The quality of domestic production of copper cored induction furnace for furnace construction materials, improve the service life, reduce the temperature of the housing.
2. Set the auxiliary tools, convenient installation and maintenance of the sensor body.
3. The "W" type spray flu, is conductive to the molten metal liquid channel directional flow, improve the heat efficiency, reduce
Temperature difference between the upper and lower parts of the groove, and improve the service life of the induction body.
4. Welcome to customization.
Making a perfect proposal for your production line;
Designing the suitable machines based on your requirements;
Manufacture machines you need;
Inspecting, packing, uploading and shipping service;
Offering all related auxiliary machines, spare parts and consumable tools;
Installing and adjusting machines on site and technology training your labors for operation;
Trial production on site till everything is going well;
On-site technology support if customer needs.
24 hours service online before sales and after sales.
Guangzhou DT Exp. & Imp. Co. Ltd is established in 2012. We are mainly manufacturing machines for non-ferrous metal production.
The main machines are electric melting furnace, holding furnace, continuous casting machine, cutting machine, peeling machine, chamfering machine, drawing machine and, straightening machine. And rolling equipment for steel and brass and copper strip.
Also we are supplying Graphite products for non-ferrous continuous casting production line and tungsten steel mold for extrusion and drawing and peeling production line.
We have a professional and passionate service team, including research and development department, technology support department and international after sales service department.
Our advantages: Qualified Machines; Professional technology, Efficient Service, Worry-free Guarantee.
Our Values: Products as the fundamental, Customers as the center, Create a win-win situation.
Audited Supplier 
){kind=link}