| Customization: | Available |
|---|---|
| Application: | Aviation, Electronics, Industrial, Hardware, Household Appliances, Car, Metal Manufacturing |
| Standard: | GB, DIN, ASTM |
|
Still deciding? Get samples of US$ 35/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Tungsten carbide rods (also known as carbide rods) are used to manufacture high quality carbide cutting tools for processing heat-resistant alloys, such as end mills, drills, reamers
| Product name | Solid carbide rod blank and grinding |
| Materials | WC + CO |
| Model number | K05-K40 |
| Grain size | Good medium |
| hardness | 87.6-94 |
| TRS | 3000-4200 |
| surface | Blank or ground |
| Apply | Used to manufacture cutting tools such as end mills, drills, reamers and burrs |
| Model number |
ISO CODE |
Grain size |
cobalt | density g / cm3 |
Hardness (HRA) |
TRS (mpa) |
| UBT05 | K05-K10 | 1.0 | 6.0 | 14.95 | 92 | 3000 |
| UBT10 | K05-K10 | 0.4 | 6.0 | 14.8 | 94 | 3800 |
| UBT20F | K20-K40 | 0.8 | 10.2 | 14.5 | 91.5 | 3900 |
| UBT20 | K20-K40 | 0.6 | 10.2 | 14.3 | 92.3 | 3800 |
| UBT25 | K20-K40 | 0.4 | 12 | 14.1 | 92.5 | 4200 |
| UBT30 | K30-K40 | 1.5 | 15 | 14 | 87.6 | 4000 |
Model number |
Recommended application |
| UBT05 | A drill, end mill and burr are recommended. Especially suitable for cutting non-ferrous metals and graphite (coating required) |
| UBT10 | Ultrafine grain, with good wear resistance. End mills and engraving tools with higher wear resistance are recommended. Suitable for cutting PCBS and plastics |
| UBT20F | A drill and end mill are recommended. Suitable for cutting ordinary steel (HRC < 48), gray cast iron, stainless steel and heat-resistant alloys |
| UBT20 | A drill and end mill are recommended. Suitable for cutting stainless steel, heat resistant alloys and cast iron |
| UBT25 | It is recommended to use tungsten carbide with ultra-fine grain, high cobalt content and good hardness and toughness, end mills and reamers, especially for cutting steel (HRC: 45-55), aluminum alloy and titanium alloy |
| UBT30 | Suitable for punching die, tool, anti-vibration boring bar, etc |
1. Model specification: ØD×L
2. Application: Used for manufacturing cutting tools, such as end milling cutter, dental drill, reamer, etc.
3. Diameter: 3mm to 30mm
4. Length: Standard 330mm / 310mm or customized
5. Surface: blank or ground
6. Material: WC + CO
){kind=link}